More domination tube

Visit Tagbits to see the full range of tagger products described in this blog.

I described my design for a Milestag Domination Tube here. I finally built it up and tried it out today:

It works well. I also continued with the domination tube box. I had already cut a hole for the tube in the lid of the box, today I installed a clamp at the base of the box to keep the tube upright:

Note the metal plate at the top of the inside of the box. This has a mechanism that allows it to tilt. I think it must be to allow the mortar rounds to roll out the box when the box is placed on that side.

With the clamp in the bottom and the tube cut to size it is progressing well.