Sunday, 19 February 2012
Budget Milestag Continued
Visit Tagbits to see the full range of tagger products described in this blog.
I've almost finished completing my budget Milestag gun build. It has a single 3 way sensor mounted at the front of the gun. I plan to make an add on kit to allow further sensors to be added as required. After fastening all the parts together, I realised I had forgotten the hole where the RJ10 connector is fitted on my standard kits:
To allow me to blank off this hole I designed this part:
Here is is printed and sprayed:
And here it is fitted to the gun body:
When adding external sensors, this blanking plug will simply be replaced with a RJ10 connector as fitted to my stanbdard gun body designs.