Domination Tube Continued

Visit Tagbits to see the full range of tagger products described in this blog.

To continue with my version of the Milestag Domination Tube I bought a genuine ammo box off EBay:

I needed to cut a 110mm hole in the top for the 'tube'. The nearest holesaw I could find was 108mm. To drill a hole of this size needs serious torque. I used my largest, and cheapest drill:

I still managed to stall this drill. It was interesting to note that the lid had dual layers. If I wanted to keep a dozen high explosive mortar shells safe, I'd use a double lid too:

Here is the box with the tube fitted. I used a pneumatic die grinder to shave off the last 1mm of radius. I need to trim it of course: